Pengenalan Produksi Bersih Untuk Perbaikan Penanganan Limbah Industri Cor pada IKM Wintolo

Authors

  • Argaditia Mawadati Universitas AKPRIND Indonesia
  • Anak Agung Putu Susastriawan Universitas AKPRIND Indonesia
  • Kartinasari Ayuhikmatin Sekarjati Industri Universitas AKPRIND Indonesia
  • Andrean Emaputra Industri Universitas AKPRIND Indonesia
  • Agus Hindarto Wibowo Universitas AKPRIND Indonesia
  • Ichza Nur Amami Universitas AKPRIND Indonesia
  • Rio Dewangga Universitas AKPRIND Indonesia

DOI:

https://doi.org/10.56910/sewagati.v3i2.1543

Keywords:

clean production, metal casting industry, waste processing

Abstract

IKM Wintolo is a small home-based business engaged in the metal casting industry. In the production process, this IKM produces waste in the form of scraps of metal and metal dust which is scattered on the production floor. IKM owners still have not implemented clean production in their businesses because of the limited knowledge possessed by owners and workers. Therefore, IST AKPRIND Industrial Engineering lecturers provide guidance to the owners and workers of IKM Wintolo. From the results of this community service there has been an increase in understanding regarding clean production practices that can be carried out at IKM Wintolo. Clean production practices that can be carried out are (1) Carrying out recycling practices for scrap metal scraps from raw materials. The remains of these pieces can be collected, cleaned, and re-melted with other melted metal products to then be used again as raw materials. (2) Using coconut shells or fiber as a filter to filter used washing water which contains heavy metals. (3) Repairs to the melting furnace cover so that the metal melting process can run more optimally.

References

Amaranti, R., Reni, D. I., Irianto, D., & Govindaraju, R. (2017). Green Manufacturing : Kajian Literatur. (pages 8-9).

Emaputra, A., Minan, N., Astanti, R. D., Mawadati, A., Sekarjati, K. A., Wibowo, A. H., ... Ridho, M. (2023). PENERAPAN 5S (SEIRI, SEITON, SEISO, SEIKETSU, SHITSUKE) PADA PENGECORAN LOGAM IKM WINTOLO DI YOGYAKARTA. Abdimas Galuh, 5(2), 1493. https://doi.org/10.25157/ag.v5i2.11475.

Kamarati, K., Aipassa, M., & Sumaryono, M. (2018). Kandungan Logam Berat Besi (Fe), Timbal (Pb) Dan Mangan (Mn) Pada Air Sungai Santan. Jurnal Penelitian Sosial Dan Ekonomi Kehutanan, 4(1), 49–56. https://doi.org/10.20886/jped.2018.4.1.49-56.

Ulya, M., & Hidayat, K. (2018). Identifikasi Peluang Produksi Bersih Pada Industri Keripik Singkong. Jurnal Teknologi Pangan, 12(1), 78–82. https://doi.org/10.33005/jtp.v12i1.1104.

Zulfikar, R., Yulianti, F., Dewi, S., Mayvita, P. A., Azahraty, A., Sanjaya, F. A., ... Efrianti, K. (2021). Implementasi Green Economy Sederhana Dan Penanganan Limbah Industri Cor Logam Ud. Sinar Daha Di Kab. Hulu Sungai Selatan. Jurnal Pengabdian Al-Ikhlas, 7(1), 103–113. https://doi.org/10.31602/jpaiuniska.v7i1.5405.

Downloads

Published

2024-06-27

How to Cite

Argaditia Mawadati, Anak Agung Putu Susastriawan, Kartinasari Ayuhikmatin Sekarjati, Andrean Emaputra, Agus Hindarto Wibowo, Ichza Nur Amami, & Rio Dewangga. (2024). Pengenalan Produksi Bersih Untuk Perbaikan Penanganan Limbah Industri Cor pada IKM Wintolo. SEWAGATI: Jurnal Pengabdian Masyarakat Indonesia, 3(2), 100–105. https://doi.org/10.56910/sewagati.v3i2.1543

Issue

Vol. 3 No. 2 (2024): Juni: Jurnal Pengabdian Masyarakat Indonesia

Section

Articles

License

Copyright (c) 2024 SEWAGATI: Jurnal Pengabdian Masyarakat Indonesia

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.